General Lab Instruments

AUTOCLAVE PORATBLE

Available in following Models:

• Complete stainless steel body.
• Fitted with pressure gauge upto 20 psi.
• The Unit has spring loaded safety valve for pressure adjustment and a dead weight safety valve.
• Autoclave is hydraulically tested upto 30 psi.
• The unit is fitted with electrical fittings, chord and plug.
• Suitable to work on 220/230 Volts, AC supply.

BACTEREOLOGICAL INCUBATOR

Optional Controls

• The Unit consists of a compact rectangular box section of light metal alloy, housing the heating elements and built-in energy regulator controls.
• The flexible and elastic heating elements ensure closer contact with the flask surface and even distribution of heat over the contact surface which minimises the breakage of glassware. High thermal insulation of glass wool backing the heating elements, minimises the heat losses.
• Every flask recess is provided with a pilot lamp and a regulator or toggle switch.
• The built-in energy regulators, where provided felicitate good control of temperature.
• Supplied With Clamps, Boss-Heads with two vertical and one Horizontal rods
• Neon lamp indicators, toggle switches. Energy regulators,
• Chord and plug for 230 V, 50 c/s., AC. [WITHOUT GLASS PARTS] .

HOT AIR OVEN

Ovens may be fitted with optional controls like:

• Double walled construction.
• Inner SS & Outer M.S. Powder coated.
• Temperature Ranges from 50 to 250°C + 1°C.
• Temperature controlled by Capillary type thermostat.
• Glass wool Insulation for the chambers and doors.
• Suitable to operate on single Phase, 230 volts, 50 Hz

DIGITAL pH METER

Specification

Supplied with standard Accessories :

• Combination Ph Electrode
• Buffer Tablets 4 Ph & 7 Ph
• Operation Manual
• Buffer Bottles (4 & 7 Ph)
• Temp Probe (101 E)
• Dust Cover
• Electrode Stand

HOT PLATE (RECTANGULAR)

Optional

• The Outer shell is made of Mild Steel sheet with powder coat finish.
• Top Working space is made of Stainless Steel Plate (or) Mild Steel Plate.
• Nicrome Heaters provided immediately beneath the working surface.
• The Unit is fitted with Energy Regulators for regulating the heat.
• Suitable to operate on single Phase, 230 volts, 50 Hz

THERMOSTATIC WATER BATH WITH CONCENTRIC RINGS

Optional

• Double walled construction with Inner Stainless Steel and Outer Mild steel with powder coat finish.
• Temperature ranges from 5° C above ambient to 100°C and is controlled by thermostat.
• Glass wool Insulation between the walls.
• Top of the water bath provided with hole of 3” diameter with concentric rings.
• The bath is fitted with ISI marked immersion type water heaters.
• Suitable to operate on single Phase, 230 volts, 50 Hz.

WATER STILL (WALL MOUNTING TYPE)

• Electrically operated water still capable of producing Pyrogen free water.
• The Boiling chamber with a high dome Lid and Tubular condensing are made of Stainless Steel.
• The Dome lid is automatically sealed by water forming in a recess in the head of the water still into which the flange of the lid rests.
• The tubular condensing column with an automatic water arrangement to maintain the water level inside the chamber With Over Flow Arrangement always constant.
• The still is fitted with immersion type Water heaters.
• The heating element is easily replaceable.
• Supplied complete with wall bracket for wall mounting, cord & plug for operation on 230 volts 50 c/s. AC mains

OTHER GENERAL LAB INSTRUMENTS