Everflow Products

Petroleum Instruments

DIGITAL BOMB CALORIMETERS with Printer

 

 

  • FOR DETERMINATION OF CALORIFIC VALUE OF LIQUIDS & SOLIDS
    This Digital Bomb Calorimeter provides a simple and inexpensive method for determination of heats of combustion of organic matter and the calorific value & sulphur contents of solid & liquid fuel.
  • The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016.
  • All parts of the outfit have been finished and tested according to the specifications laid down by Institute of petroleum and British Standard Institute
  • Supplied complete with Certified Bomb, Calorimeter Vessel, Water Jacket (with or Without Puff insulation),  Stirrer,  Electronic Firing unit with Digital Beckman Thermometer, Printer, Nichrome wires, threads, Benzoic acid of know calorific value, Crucibles and all accessories.
  • Suitable to operate on 220V, single phase, 50 Hz AC Mains

 

CLEAVELAND OPEN CUP FLASH & FIRE POINT APPARATUS

Available in following models:

Apparatus with Energy regulator and Oil Jet (or) Gas Jet test flame
Apparatus with Voltage Varriac and Oil (or) Gas jet
Apparatus with Voltage Varriac and Digital Temperature Indicator
    • This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80º C as per specification IP 36 and IS : 1448 (P:69) 1969.  The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner.
    • The Instrument having Oil Test Jet / Gas Test Jet.
    • Heating is controlled by means of energy regulator fitted to the apparatus. 
    • Suitable for operation on 220 Volts, 50 cycles, AC circuits.

COPPER STRIP CORROSION TEST APPARATUS.
(ASTM-D-130,D-1616,D-1838, and IP-112,154 and IS-1448)

Accessories

Stainless Steel Bomb
Vice Single Strip
Vice Six Strip
Copper strip (pack of 3 strips)
Inspection tube (Glass)
Test tube 6" X 1"
  • Used for detecting the presence of corrosive sulphur in petroleum products.
  • The apparatus consists of a bath either dual purpose (50°C & 100°C) or a boiling bath (100° C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accomodate in each type of bath with different temperature regulation system (Thermostatic control (or) Digital Temperature controller cum indicator.
  • Suitable to operate on 220 volts AC. mains

DISTILLATION APPARATUS

Available in following models

  • Single Distillation Apparatus with energy regulator (or) electronic solid state regulator (or) Voltage Varriac
  • Twin (Duplex) distillation Apparatus with energy regulator (or) electronic solid state regulator (or) Voltage Varriac
  • Made in accordance with specifications as IP:24, 123 & IS 1448(P:18)1967.
  • This apparatus is used for determination of distillation characteristic of Petroleum Products.
  • The instrument consists of metal shield fitted with asbestos board to support distillation flask with GEARED height adjustable device.
  • It has slide for vapour tube and lining having glass window for Clear view of inside objects.
  • The condenser bath is provided with Mild Steel black painted stand (without glasswares) electrically operated on 220 volts AC mains

DUCTILITY TEST APPARATUS as Per I.S.1208, ASTM D 113

 
  • The Ductility Testing machine is suitable for testing 3 specimens simultaneously.
  • The machine consists of a carriage moving over a lead screw.
  • An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation.
  • The entire assembly is mounted with a copper lined waterbath completely encased in metal bound hardwood.
  • It is equipped with an electric pump circulator and heater.
  • The machine is fitted with digital temperature controller in the range of 1 to 32° C. The machine is provide with two speeds i.e. 5cm/min. and 1cm.min. are provided.
  • Suitable operation on 220V, 50Hz, single Phase, A.C. supply

KINEMATIC VISCOSITY BATH

Available in following capacities:

WORKING  SPACE
VOLUME
SUITED FOR VM
120 x 220 x 260  mm 12 2
200 x 260 x 300  mm 28 4
370 x 260 x 350  mm 40 8

Optional:

Pump cum Stirrer within an output of 10 mtrs above zero head

 

  • This is a  high precision FULL VISIBILITY Bath with S.S Tank.
  • The outer casing is made of Aluminium and pointed in a pleasing color.
  • A Stirrer/pump keeps the temperature of the bath liquids uniform throughout.
  • The heaters are immersed from the top of the bath.
  • The temperature is controlled by Digital Temperature Controller cum Indicator.
  • Temperature ranges from 5°C above ambient to 120°C.
  • Suitable to operate on single phase,  220 Volts, 50 Hz

STANDARD PENETROMETER


 

  • Used to determine grade of bitumen.
  • The penetration test determine consistency of bitumen for the purpose of grading: Depth units 1/10 of millimeter to which is standard needle having a standard weight will penetrate vertically in a duration of five seconds at temperature of 25 C determines penetration of graduation.
  • It consists of a vertical pillar mounted on a base provided with leveling screw. 
  • The dial is graduated in 400 1/10 and the millimeter subdivision and the needle pointer against figure makes easy reading.
  • Supplied with a bitumen penetration needle, and weight 50 gms, 100 gms(one each) and two samples containers

REDWOOD VISCOMETER


  • These viscometers are designed for viscosity tests of petroleum products. 
  • They confirm to requirements of IP 70 (former). 
  • Two adoption of Red Wood Viscometer are available No.1 for liquids having Red wood flow 20 to 2000 seconds and No.II for liquids whose flow time exceeds 2000 seconds.  The complete out fit comprises Stainless Steel bath with electrical heating arrangement by Immersion Heaters and controlled by Digital Temperature Controller cum Indicator.
  • The apparatus comprises tap, silver plated coil cup with precision stainless Steel jet, cup cover, ball valve, thermometer-clip, Stirrer and M.S. Sheet stand with leveling screws.
  • Temperature is uniformly distributed throughout the chamber by Stirrer.
  • Suitable to operate on 220 Volts, 1 ph, 50 Hz

SEMI-AUTOMATIC PENSKY MARTENS FLASH POINT APPARATUS


  • This apparatus is made as per IP34, ASTM D – 93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B.
  • Used for finding out Flash Point above 70°C and below 300°C.
  • The instrument having Oil Test Jet (or)  Gas Test Jet Flame Device, stirrer with flexible shaft.
  • The assembly rests in Air Bath which is covered with Dome shape metal top.
  • The cup is fitted with insulated handle and locking arrangement near cup flange.
  • Electronic Temperature Controller with Automatic dipping cycle with Remote control Oil (or) gas jet.
  • Suitable to operate on 220 Volts,  1 phase, 50 Hz.

FUEL, TRANSFORMER OILS, FURNACE OILS, LUBRICATING  OILS AND OTHER ALLIED  PRODUCTS TESTING INSTRUMENTS

  • Aniline Point
  • Abel Flash Point
  • Acidity by Extraction
  • Adiabatic Bomb Calorimeter
  • Acidity Testing Kit of Transformer Oil
  • ASTM Colour Comparator
  • Aging Test Oven
  • Bomb Calorimeter
  • -Do – Computerised
  • Buring Test Lamps
  • Conradson Carbon Residue
  • Cloud & Pour Point
  • Centrifuge (Oil)
  • Cleveland
  • Copper Strip Corrosion
  • Colorimeter as per IS 335 for transformer Oil with one Filter
  • Dean & Stark
  • Distillation
  • Demulsification
  • Emulsion test
  • Engler Viscometer
  • Electric Strength
  • Existent Gum Bath (ROE)
  • Flow cup Viscometer
  • Foaming test
  • Falling Ball Viscometer
  • Freezing Point
  • Interfacial Viscometer Bath & U-Tube of Different size
  • Michels Falling Sphere Viscometer
  • Oxidation Test of Lubricating  Oil
  • Petroleum Hydrometer
  • Peroxide Bomb Calorimeter
  • Pensky   Martens Flash Point
  • Redwood Viscometer N0.1 &  N0.2
  • Ramsbottom Carbon Residue
  • Reid Vapour  Pressure
  • Rust Preventing Characteristic
  • Saybolt  Viscometer
  • Smoke Point
  • Sulphur by Lamp
  • Junkers Calorimeter
  • Oxidation Stability (distillate Fuel)
  • Stroking Test
  • Tag Flash Point
  • Zahn Viscometer
  • Extreme Properties of lubricating fluids (TIMKEN Method)
  • Marcaptan sulphur and hydrogen sulphur contents of LPG
  • Shear stability of polymer  containing oils
  • Apparent viscosity of engine oils  between –40 and 0 deg C
  • Smoke density apparatus in flue gases
  • Hydrogen  sulphide  in LPG  (Lead Acetate Method)
  • Salt in crude oil
  • Shear  stability of polymer (diesel injector nozel)
  • Oxidation stability of gasoline automotive engine oils (TFOUT)
  • Water in crude oils by  coulometric karlfisher tritration

PAINT TESTING INSTRUMENTS

    • Bend Test
    • Chequer Board
    • Cupping Test
    • Centrifuge (paint)
    • Dean & Stark
    • Distillation
    • Dial Thermometer
    • Wet Film Thickness Gauge
    • Flow cup (IS 101)
    • Ford Cup  (ASTM D 1200)
    • Film Applicator
    • Glossmeter
    • Gardner Viscometer
    • Muffle furnace
    • Oven
    • Paint Corrosion Cabine
    • Paint Panels
    • Paint Stickness Tester
    • Pressre Test
    • Scratch Hardness
    • Sampling Tube
    • Salt Spray
    • Sieve 63 Microns
    • Stormer Viscometer
    • Tubular Impact Tester
    • Weight per Litre cup

web design - www.vijayachandaran.com