R&D Lab Instruments

DIGITAL MICROSCOPE(UPGRADED)(USB, RCA & VIDEO)

Available in following models:

• High transmission Video Observation head 30° inclined, 360° rotatable.
• High eye point wide field eye piece WF 10x  Paired (F.NO. 20)
• Super Plan Obj.  PL4x, PL10x, PL40x & PL100x, Oil Immersion
• Magnification Range           40x to 1000x standard. Optionally upto 2000x.
• High resolution built in digital camera with resolution 1.3 pixels, High Resolution Chip, RCA, S-Video, USB 2.0 output.  
• Imported Co-axial coarse and fine focusing system supported on ball bearing with tension control and pre focus stopper. Coarse focus range 30 mm and fine focusing reading to 0.002 mm.
• Reverse Revolving quadruple/quintuple nose piece with ball bearing for perfect alignment.
• Rectangular graduated mechanical stage 135 mm x 140 mm with low position Co-axial X-Y motion controls on right hand side.
• Koehler's illumination system with 6V/30W (CE approved)  super   bright halogen lamp & solid state variable light control.
• A versatile software for image Capturing, Processing and Editing

ENVIRONMENTAL CHAMBER

Available with following Sizes:

Optional Accessories:

• Designed for conducting various experiments under different parameters of temperature, humidity etc.      Atmospheric environment is simulated within the laboratory to perform different experiments without going into the field.
• Double walled chamber.  Inner Stainless Steel and outer Mild Steel sheet with powder coat finish.
• Insulation by fine glass wool.
• Double door system with Inner Glass door and door operating lamp for illumination.
• Temperature ranges from  +10°C to 90° C. 
• Temperature is controlled by Digital Temperature Controller cum Indicator.
• Humidity ranges from atmospheric condition  to  90% +  3% and is attained by steam generated from the SS Reservoir tank fitted at the bottom.
• Humidity controlled by Humidistat and is indicated by Dial type Hygrometer.
• Illumination for day light effect is achieved by Fluorescent tubes equally distributed inside the chamber and is controlled by 24 hours timer.
• Air Circulation Fan maintains temp. uniformity in the chamber.
• Suitable to operate on single phase 230 Volts, 50 Hz.

FUME EXHAUST HOOD

Available with following Sizes:

• Made out of 19mm thick waterproof plywood, exteriors covered by 0.8mm thick laminated sheets.
• Interiors coated with epoxy paint over a suitable primer base. 
• The inner wall of the working chamber is covered with epoxy coated asbestos.
• Working table will be covered with acid proof ceramic tiles with sink & gas cocks
• Three pin sockets with switches provided for electrical connection inside the hood.
• The exhaust system consists of Centrifugal impeller with industrial motor

FURNACE

Available with following Sizes:

• Outer Mild Steel sheet with iron angles riveting, screw joints and welded.
• Inner heating chamber is made of Rectangular shape muffle.
• The unit is insulated by Ceramic Fibre blankets.
• Heating elements are made of kanthal wires and is coiled around the chamber.
• Temperature ranges from working temperature of 930° C and maximum temp. of 1000°C with accuracy of +/-3°C.
• Suitable to operate on single phase, 230 Volts, 50 Hz supply

ORBITAL SHAKING INCUBATOR

Available in following platform sizes:

Optional Accessories:

• Robust Construction, Double walled chamber with Inner SS and Outer MS with powder coat finish.
• Double door system with inner glass door.
• Temperature Ranges from 5°C to  60°C.
• Shaking Range                   :  50 to 250 rpm.
• RPM                                      : Digital RPM meter
• Speed control                    :  Variable speed control knob
• Temperature controller   : Digital Temp. Controller Cum Indicator.   
• Accuracy                            :  +/-1° C
• Shaking platform              :  Made of stainless steel

ROTARY VACUUM FLASH EVAPORATOR (BUCHI TYPE) with Vertical Condenser

• This model of Evaporator is supplied complete with AC non-sparking geared drive unit.
• Support stand fitted with jack arrangement on stainless steel rod for positioning  glass assembly, regulator for drive unit heat control & slight speed variation.
• Thermostatically controlled stainless steel water bath fitted on a jack 
• Glass assembly comprises of double coiled vertical glass condenser, Khjeldahl flask, receiver flask & vapour path tube.
• Supplied complete with clamps and clips for holidng the kjeldahl flask, receiver flasks and gasket for vacuum applications.
• Suitable to operate on single phase, 230 volts, 50 Hz

R & D LAB PRODUCT LIST